Tangential Chasers

Mohindra Precision Tools Pvt. Ltd manufactures the most efficient Tangential Chasers for the esteemed clients. Tangential Chasers are manufactured for external threading of components which are hard to roll such as Big Bolts, Fasteners or Pipes. The Tangential Chasers are suitable for Landis, Lanco, Landmatic, Gents and Wagner type die heads. Our Chasers are made for all Threading Standards and Die Head Sections in 4 piece and 6 piece sets. The Tangential Chasers are fabricated from HSS-M2 Steel. The Chasers are known for accurate thread profile and correct parameters with respect to fitting and setting on die heads. We manufacture Tangential Chasers for all thread standards viz. METRICS (Pitch 0.5mm-5.0mm), UNIFIEDS (8tpi-40tpi), and IMPERIALS (5tpi-40tpi) Chasers to thread special profiles and ACME type threads are also made as per requirement.

Features :

• Durable
• Efficient performance
• Dimensional accuracy
• Low maintenance
• Cost-effective

Used For :

• Threading of fasteners and pipes

Application :

• Industrial usage

Information required for ordering HSS Tangential Chasers :

• Section : Length, Thickness and Width of Chasers
• Thread Pitch along Standard
• Dovetail Dimensions : Dovetail Width & Thickness
• Throat Size and Angle
• Type of Operation : Threading on Rods or Bolts or on Pipes